Roller chain 16A-1 (ANSI 80-1), pitch 25.4 mm (1"), with rubber pad, C45 steel

Product Description

Chain 16A-1 (80-1) with rubber pad combines the design of a classic 16A-1 (80-1) roller chain (simplex) with a layer of rubber vulcanised onto the plates - as a result it protects the product, reduces line noise and increases grip.

The top is made of NBR (nitrile butadiene rubber), giving the product good resistance to oils, greases, fuels and common organic solvents while maintaining high elasticity. The manufacturer specifies an operating range from -20°C to +100°C. The steel body of the chain complies with DIN 8187 / ISO 606.

Technical data

Applications

The 16A-1 (80-1) version with rubber pad is chosen for conveyors where gentle guidance of the load matters - the rubber protects the product surface and reduces the noise level of the running line. Typical industries of use are the food and packaging industries, logistics and sorting centres, the glass and ceramics industry, as well as agricultural machinery and lines with low or medium conveying speed.

Frequently asked questions

Which chain has a pitch of 25.4 mm, a roller of 15.88 mm and an inner width of 15.75 mm?

It is the 16A-1 roller chain according to DIN 8188 / ISO 606 (ANSI B29.1), single-strand. If the measured chain has these dimensions, the matching product in the Ozdowski range is: roller chain 16A-1 (ANSI 80-1), pitch 25.4 mm (1"), with rubber pad, C45 steel. The pitch is measured as the distance between the axes of adjacent pins.

What is the 16A-1 (80-1) chain with rubber pad intended for?

Where the conveyed product must be protected against mechanical damage and slipping - the rubber top acts as a buffer between the chain and the conveyed goods.

What material is the top made of?

As standard, NBR rubber (acrylonitrile-butadiene rubber), with a hardness of 75 ±5 ShA (standard). This material provides good resistance to oils, greases, fuels and common organic solvents while maintaining high elasticity.

How does the designation 16A-1 differ from 80-1?

These are two designations of the same chain in different standards - 16A-1 is the ISO/DIN designation, and 80-1 is the corresponding designation in the American ANSI standard.

What are the maximum dimensions of the pad in the 16A-1 (80-1) version?

L2 (top width, max) is 26.70 mm, while h5 (overall height, max) is 20.00 mm.

What is the weight of the 16A-1 (80-1) chain per running metre?

The 16A-1 (80-1) chain with rubber pad weighs 3.5 kg per running metre.

What does the lead time depend on?

When ordering, please check the current stock level of this chain - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.