Roller chain 10BHP-1 Hollow Pin, pitch 15.875 mm (5/8"), with straight plate, stainless steel

Product Description

Roller chain 10BHP-1 Hollow Pin, pitch 15.875 mm (5/8"), with straight plate, stainless steel is a single-strand roller chain with a pitch of 15.875 mm (5/8"), compliant with DIN 8187 / ISO 606.

The plates have a straight (non-waisted) profile, so the chain can slide on a guide rail or carry the load directly on the plates. The pin is hollow (Hollow Pin) - rods, dowels or fasteners can be inserted through its bore. The stainless steel version provides corrosion resistance in humid environments, in contact with water and during washing.

Technical data

Applications

It is used in conveyors and feeders, packaging and sorting lines, and in machines where the chain not only transmits drive but also conveys or guides parts.

Frequently asked questions

Which chain has a pitch of 15.875 mm (5/8"), a roller of 10.16 mm and an inner width of 9.65 mm?

It is the 10BHP-1 roller chain according to DIN 8187 / ISO 606, single-strand. If the measured chain has these dimensions, the matching product in the Ozdowski range is: roller chain 10BHP-1 Hollow Pin, pitch 15.875 mm (5/8"), with straight plate, stainless steel. The pitch is measured as the distance between the axes of adjacent pins.

Which sprockets does the 10BHP-1 chain work with?

With 10BHP sprockets with a pitch of 15.875 mm, designed for single-strand chain according to DIN 8187 / ISO 606.

Which connecting link fits the 10BHP-1 chain?

The 10BHP-1 connecting link (spring clip link) with the same pitch of 15.875 mm. To obtain an odd number of pitches, use the 10BHP-1 offset link (cranked link).

How do I order a chain of the required length?

The chain is sold by the metre - state the number of metres in your order. To close the chain into a loop you need a connecting link (spring clip link) with the same designation.

When should the 10BHP-1 chain be replaced?

When the chain has elongated by approx. 3% of its nominal length (e.g. by 30 mm per metre), it starts to mesh poorly with the sprockets and accelerates their wear. The chain should then be replaced, and if the teeth are badly worn, the sprockets as well.

Do stainless components need lubrication?

Yes. Stainless steel does not rust, but lubrication still reduces friction and wear of the joints. In food applications, use a lubricant approved for food contact.

What does the lead time depend on?

When ordering, please check the current stock level of this chain - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.