Roller chain 10B-2, pitch 15.875 mm (5/8"), with rubber pad L=133 links, C45 steel

Product Description

Roller chain 10B-2, pitch 15.875 mm (5/8"), with rubber pad L=133 links, C45 steel is a double-strand (duplex) roller chain with a pitch of 15.875 mm (5/8"), compliant with DIN 8187 / ISO 606.

It has a rubber pad on the plates that protects the conveyed parts and increases friction during transport. It has extended pins on which additional elements, e.g. flights or slats, can be mounted. Ozdowski brand chains are made of C45 steel, and each element - pin, bush, roller and plate - is hardened separately before assembly. As a result, their strength is up to approx. 20% higher than the standard requires.

Technical data

Applications

It is used in conveyors and feeders, packaging and sorting lines, and in machines where the chain not only transmits drive but also conveys or guides parts.

Frequently asked questions

Which chain has a pitch of 15.875 mm (5/8"), a roller of 10.16 mm and an inner width of 9.65 mm?

It is the 10B-2 roller chain according to DIN 8187 / ISO 606, double-strand (duplex). If the measured chain has these dimensions, the matching product in the Ozdowski range is: roller chain 10B-2, pitch 15.875 mm (5/8"), with rubber pad L=133 links, C45 steel. The pitch is measured as the distance between the axes of adjacent pins.

Which sprockets does the 10B-2 chain work with?

With 10B sprockets with a pitch of 15.875 mm, designed for double-strand (duplex) chain according to DIN 8187 / ISO 606.

Which connecting link fits the 10B-2 chain?

The 10B-2 connecting link (spring clip link) with the same pitch of 15.875 mm. To obtain an odd number of pitches, use the 10B-2 offset link (cranked link).

Does the 10B-2 chain fit ASA 50 sprockets?

No. The 10B chain (European standard) and the ASA 50 chain (American standard) have the same pitch but a different roller diameter and inner width. These systems should not be mixed.

When should the 10B-2 chain be replaced?

When the chain has elongated by approx. 3% of its nominal length (e.g. by 30 mm per metre), it starts to mesh poorly with the sprockets and accelerates their wear. The chain should then be replaced, and if the teeth are badly worn, the sprockets as well.

What does the lead time depend on?

When ordering, please check the current stock level of this chain - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.