Chain 08B-1 with A1 attachment on every inner and outer link, one side

Product Description

Roller chain 08B-1 with A1 attachment on every inner and outer link, one side

Roller chain 08B-1 ensures reliable torque transmission in industrial drives - pitch 12.7 mm, simplex version. Manufactured in accordance with DIN 8187 / ISO 606; as a European manufacturer, we guarantee full dimensional compatibility with sprockets made to the same standard. The chain is equipped with a bent type A-1 attachment (flight), fitted to selected outer links and used to mount conveyed or driving elements. The attachment is fitted to every link (inner and outer), on one side - this ensures the maximum mounting density for conveyed elements. Ozdowski brand chains offer strength up to 20% higher than the standard requires - each component (pin, roller, plate) is hardened individually before the chain is assembled, which translates into greater durability and resistance to elongation.

Technical data

Frequently asked questions

How do I select the right roller chain with attachment for an industrial drive?

The key is to determine three parameters of the chain itself: pitch, inner width and roller diameter - for 08B these are 12.7 mm, 7.75 mm and 8.51 mm respectively. In addition, the type and spacing of the attachments must be matched to the machine design.

What is an A-1 attachment and what is it used for?

The A-1 attachment is a single-sided bent attachment with one mounting hole, offset to the side of the link. It is mounted on selected links of the 08B chain to fix conveyed elements, flights, dividers or other working elements to the drive - the exact spacing of the attachments must be matched to the machine design.

What is the difference between a bent and an upright attachment?

The bent attachment (designations without the letter S, e.g. A-1, K-1, WA-2, WK-2) has a plate bent into an L shape and fixed to the side of the chain, close to its axis. The upright attachment (with the letter S, e.g. SA-1, SK-1, WSA-2, WSK-2) has a plate mounted perpendicularly, projecting upwards from the chain. The choice depends on how the flight, divider or other element is fixed in the specific machine.

When should an offset link (half link) be used in a chain drive?

An offset link is used only when the chain length requires an odd number of links. Bear in mind that fitting an offset link slightly weakens the chain, so it is better to choose a length that avoids it.

Where is this product used?

Chain 08B with A-1 attachment is used in conveyors, feeders and transport lines, where a flight, partition or other working element mounted on the attachment pushes or lifts the conveyed goods. Typical applications include packaging lines, sorting machines and conveyors in the food industry and agricultural machinery.

Product photos are for illustrative purposes only.