Sprocket 10B-1 z=76 for Taper-Lock bush 2012, cast iron

Product Description

Sprocket 10B-1 z=76 for Taper-Lock bush 2012, cast iron works with 10B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 15.875 mm (5/8"). It has 76 teeth and is made of EN-GJL-250 cast iron.

The sprocket has a seat for a Taper-Lock 2012 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 2012 bush with a bore that matches the shaft. The hub diameter is 111 mm and the total width of the sprocket is 32 mm. The bush is not included - the 2012 bush can be purchased separately from our range.

Technical data

Applications

It is found in production lines, mixers and screw feeders. The cast iron design works well for large sprockets in reduction gears, where rigidity and vibration damping matter.

Frequently asked questions

Which chain does this sprocket fit?

10B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 15.875 mm. A simplex sprocket requires a single-strand (simplex) chain.

Does it fit ASA 50 chain?

No. ASA 50 chain (American standard) has the same pitch and roller diameter, but a different inner width (9.52 mm instead of 9.65 mm). The 10B sprocket is designed for European-standard chain, so the two systems should not be mixed.

Is this sprocket available in another version?

Yes. Also available: Sprocket 10B-1 z=76 for Taper-Lock bush 2012, C45 steel.

Can a Taper-Lock bush be used on a shaft without a keyway?

The bush holds on the shaft by friction, but in drives transmitting high torque a key is an essential safeguard. Bushes with larger bores have a standard keyway to DIN 6885.

How can run-out be avoided after mounting the bush?

Cleanliness of the shaft, the bush and the sprocket seat is crucial. Even a small chip between the bush taper and the sprocket causes run-out, which accelerates wear of the chain and bearings.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.