Sprocket 08B-3 z=25 for Taper-Lock bush 2012, C45 steel

Product Description

Sprocket 08B-3 z=25 for Taper-Lock bush 2012, C45 steel works with 08B-3 roller chain (European standard DIN 8187 / ISO 606), triple-strand (triplex), with a pitch of 12.7 mm (1/2"). It has 25 teeth and is made of C45 steel.

The sprocket has a seat for a Taper-Lock 2012 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 2012 bush with a bore that matches the shaft. The total width of the sprocket is 34.9 mm. The bush is not included - the 2012 bush can be purchased separately from our range.

Technical data

Applications

It works well in drives of conveyors, packaging machines and production lines where the sprocket has to be replaced quickly. The triple-strand version is chosen for very heavily loaded drives where there is no room for a chain with a larger pitch.

Frequently asked questions

Which chain does this sprocket fit?

08B-3 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 12.7 mm. A triplex sprocket requires a triple-strand (triplex) chain.

Does it fit ASA 40 chain?

No. ASA 40 chain (American standard) has the same pitch, but a different roller diameter (7.94 mm instead of 8.51 mm) and a different inner width (7.94 mm instead of 7.75 mm). The 08B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How do I choose the bush for this sprocket?

The sprocket has a seat for a Taper-Lock 2012 bush, so a bush with the same number is needed. It is chosen with a bore matching the shaft diameter - before ordering, it is worth measuring the shaft carefully with a caliper in several places.

What does bush number 2012 mean?

The four-digit number indicates the size of the bush. The last two digits give its width in tenths of an inch - the 2012 bush is 1.2 inch wide. The sprocket and the bush must have the same number.

How do I mount a sprocket with a Taper-Lock bush?

Insert the bush into the sprocket seat, align the holes and lightly screw in the screws. Then slide the assembly onto the shaft and tighten the screws alternately until the bush is firmly clamped on the shaft.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.