Sprocket 06B-1 z=20 for Taper-Lock bush 1008
Available product promotions:
-
Weight0,2kg
-
UPC Code5908453547439
Product Description
Sprocket 06B-1 z=20 for Taper-Lock bush 1008 is designed for 06B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 9.525 mm (3/8"). It has 20 teeth and is made of C45 steel.
The sprocket has a seat for a Taper-Lock 1008 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 1008 bush with a bore that matches the shaft. The hub diameter is 46 mm and the total width of the sprocket is 22 mm. The bush is not included - the 1008 bush can be purchased separately from our range.
Technical data
| Chain | 06B-1 (DIN 8187 / ISO 606) |
| Pitch | 9.525 mm (3/8") |
| Chain inner width | 5.72 mm |
| Roller diameter | 6.35 mm |
| Number of teeth | 20 |
| Pitch diameter Dp | 60.89 mm |
| Outside diameter De | 64.3 mm |
| Bush | Taper-Lock 1008 (sold separately) |
| Hub diameter d | 46 mm |
| Total width H | 22 mm |
| Tooth width | 5.3 mm |
| Material | C45 steel |
| Weight | 0.2 kg |
| EAN | 5908453547439 |
Applications
It is found in agricultural machinery, workshop equipment and gate drives.
Frequently asked questions
Which chain does this sprocket fit?
06B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 9.525 mm. A simplex sprocket requires a single-strand (simplex) chain.
Does it fit ASA 35 chain?
No. ASA 35 chain (American standard) has the same pitch, but a different roller diameter (5.08 mm instead of 6.35 mm) and a different inner width (4.77 mm instead of 5.72 mm). The 06B sprocket is designed for European-standard chain, so the two systems should not be mixed.
Is this sprocket available in another version?
Yes. Also available: Sprocket 06B-1 z=20 for Taper-Lock bush 1008 hardened.
Can the bush taper be greased before mounting?
No. The bush works by friction, and grease on the tapered surfaces can cause the bush to be drawn in too deep and crack the sprocket hub. The tapered surfaces must be degreased before mounting.
How do I remove a sprocket with a Taper-Lock bush?
Remove the mounting screws and screw one of them into the free dismounting hole. The screw then acts as a puller and pushes the bush out of the sprocket seat.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight0,2kg
-
UPC Code5908453547439