Sprocket 12B-1 z=14 for Taper-Lock bush 1610 hardened

Product Description

Sprocket 12B-1 z=14 for Taper-Lock bush 1610 hardened fits 12B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 19.05 mm (3/4"). It has 14 teeth and is made of C45 steel. The teeth are induction hardened, which increases their abrasion resistance.

The sprocket has a seat for a Taper-Lock 1610 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 1610 bush with a bore that matches the shaft. The hub diameter is 70 mm and the total width of the sprocket is 25 mm. The bush is not included - the 1610 bush can be purchased separately from our range.

Technical data

Applications

It is used in woodworking machinery, winches and internal transport equipment.

Frequently asked questions

Which chain does this sprocket fit?

12B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 19.05 mm. A simplex sprocket requires a single-strand (simplex) chain.

Does it fit ASA 60 chain?

No. ASA 60 chain (American standard) has the same pitch, but a different roller diameter (11.91 mm instead of 12.07 mm) and a different inner width (12.7 mm instead of 11.68 mm). The 12B sprocket is designed for European-standard chain, so the two systems should not be mixed.

Is this sprocket available in another version?

Yes. Also available: Sprocket 12B-1 z=14 for Taper-Lock bush 1610.

How do I mount a sprocket with a Taper-Lock bush?

Insert the bush into the sprocket seat, align the holes and lightly screw in the screws. Then slide the assembly onto the shaft and tighten the screws alternately until the bush is firmly clamped on the shaft.

Can the bush taper be greased before mounting?

No. The bush works by friction, and grease on the tapered surfaces can cause the bush to be drawn in too deep and crack the sprocket hub. The tapered surfaces must be degreased before mounting.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.