Bevel gear set module 4 z=16/56, ratio 1:3.5, type B, straight teeth, C45 steel

Product Description

Bevel gear set module 4 z=16/56, ratio 1:3.5, type B, straight teeth, C45 steel - a bevel gear set with module 4 and 16/56 teeth for a 90° right-angle drive with a 1:3.5 ratio. The gears are made of C45E steel, pressure angle 20°.

The pitch diameter of the pinion is 64 mm and of the gear 224 mm.

Technical data

Applications

Bevel gear drives in special machines, hoisting equipment, gate and valve drives and technical model making.

Frequently asked questions

Which bevel gears have module 4, 16/56 teeth and a 1:3.5 ratio?

This is the bevel gear set module 4 z=16/56, ratio 1:3.5, type B, straight teeth, C45 steel. The pinion has a pitch diameter of 64 mm and the gear 224 mm.

Are both gears included in the set?

Yes. The set contains two mating bevel gears (z=16 and z=56) matched to work as a pair. Gears with the same module from other sets may have a different cone geometry and should not be combined.

How are bevel gears mounted?

The shaft axes must intersect at 90°. The gears are positioned axially so that the apexes of their pitch cones coincide, with a small backlash between the teeth. Too little backlash causes heating and noise, too much causes knocking when the direction of rotation changes.

Do bevel gears need lubrication?

Yes. Steel bevel gears are lubricated with grease or gear oil - this reduces wear and noise and protects against corrosion.

What does the lead time depend on?

When ordering, please check the current stock level of these gears - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may differ between warehouses.

Product photos are for illustration purposes only.