Sprocket 32B-3 z=35 with hub

Product Description

Sprocket 32B-3 z=35, with hub

Sprocket 32B-3, triplex (three-strand), with 35 teeth and a hub - pitch 2" (50.8 mm). The material is C45E carbon steel (EN 10083-1), and the teeth remain unhardened (without induction hardening) - in accordance with DIN 8187 / ISO 606; this version is easier to machine over the entire depth of the sprocket.

Technical data

Frequently asked questions

Does the machine's operating temperature matter when choosing the sprocket material?

Yes - at very low or very high temperatures the mechanical properties of steel or cast iron change, and lubricants may change viscosity or thicken. Under unusual thermal conditions (cold stores, furnaces, dryers), it is advisable to consult the supplier before selecting a specific material variant.

In what cases are multi-strand sprockets used?

They are used to drive multi-strand chains in heavily loaded machines where there is no room for a wider sprocket with a larger pitch. Several strands distribute the load evenly, preventing premature chain breakage.

Does a sprocket with hub have a fixed mounting side, or can it be reversed?

The sprocket is usually symmetrical with respect to the plane of the rim, so the rim itself cannot be "reversed incorrectly" - but the hub is usually on only one side of the sprocket, which determines which way the sprocket must be mounted relative to other components on the shaft (e.g. bearings, other sprockets).

How does the choice of the number of teeth affect vibration levels and drive operation?

A smaller number of teeth means fewer meshing points per revolution and larger fluctuations in the instantaneous chain speed (the so-called polygon effect), which results in higher vibration levels. Increasing the number of teeth of the sprocket (at the same pitch) smooths the operation of the drive, although it increases its overall dimensions.

Where is this product used?

32B-3 sprockets operate in drives of construction machinery, goods lifts, aggregate conveyors and woodworking machines - wherever tooth durability under load matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.