Sprocket 32B-3 z=12 with hub

Product Description

Sprocket 32B-3 z=12, with hub

Sprocket 32B-3 (pitch 2" - 50.8 mm), triplex (three-strand), 12 teeth, with hub. Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with a chain of the same pitch; the sprocket is made of C45E steel (EN 10083-1) in a non-hardened version - the standard choice for applications with moderate and medium load.

Technical data

Frequently asked questions

How can you recognise an idler sprocket bearing that is starting to wear before it fails?

The first symptom is usually increased noise and noticeable, excessive play of the sprocket when it is moved by hand with the machine stopped. It is also worth periodically checking the temperature of the bearing housing during operation - an increase compared with other bearings in the system signals progressive wear.

How do you correctly align sprockets during installation?

The driving and driven sprockets must be in one perfect line. You can use a long steel straightedge placed against the faces of both sprockets or a professional laser alignment tool. Even a slight angular deviation will quickly destroy the chain.

Can a sprocket with a technological bore be installed without additional machining?

No - the technological bore is deliberately too small to fit a typical shaft. It must be bored on a lathe to the required diameter and, if necessary, a keyway cut according to the requirements of the specific machine.

How can you check whether the chain in an existing drive is already excessively elongated (stretched)?

Stretch out a section of a dozen or so chain links and compare its length with the catalogue dimension - an elongation of more than approx. 2-3% means the chain is due for replacement. A stretched chain no longer seats properly on the sprocket teeth, which accelerates the wear of both components, so it is better to replace it before it damages the sprocket as well.

Where is this product used?

32B-3 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.