Sprocket 32B-1 z=22 with hub

Product Description

Sprocket 32B-1 z=22, with hub

Sprocket 32B-1 with hub, 22 teeth, simplex - a product matched to chain with a pitch of 50.8 mm (2"). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

What is the relationship between the number of teeth of a sprocket and the rotational speed of the drive?

This is the basic principle of the transmission ratio. If there is a small sprocket on the motor (drive) and a large one on the machine, the machine will turn more slowly but gain proportionally greater torque (force).

How do you correctly align sprockets during installation?

The driving and driven sprockets must be in one perfect line. You can use a long steel straightedge placed against the faces of both sprockets or a professional laser alignment tool. Even a slight angular deviation will quickly destroy the chain.

How does a sprocket differ from a module spur gear?

A sprocket works with a roller chain and has a tooth profile matched to the chain rollers (standard DIN 8187/ISO 606), whereas a module spur gear meshes directly with another gear or a gear rack, has an involute tooth profile and parameters described by the module (standard DIN 780/ISO 54). These are two different power transmission systems, not interchangeable with each other.

How do you select a sprocket when the machine lacks space for a larger pitch?

In such a situation, a better solution than increasing the pitch is often to use a multi-strand chain and sprocket of the same (smaller) pitch - several strands together carry a greater load without increasing the sprocket diameter.

Where is this product used?

Typical applications of the 32B-1 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.