Sprocket 28B-3 z=15 with hub

Product Description

Sprocket 28B-3 z=15, with hub

Sprocket 28B-3 with hub, 15 teeth, triplex (three-strand) - a product matched to chain with a pitch of 44.45 mm (1 3/4"). As a European manufacturer, Ozdowski supplies the sprocket in C45E steel (EN 10083-1), in accordance with DIN 8187 / ISO 606 - a version without tooth hardening, cheaper than the hardened variant and sufficient for many typical industrial applications.

Technical data

Frequently asked questions

What is a technological bore in a sprocket and why is it left?

We manufacture sprockets with hub with a small, so-called pilot (preliminary) bore. We leave it deliberately so that the customer (or workshop) can bore it precisely to the exact shaft size of their machine.

How do you cut a keyway in the hub of a sprocket?

We cut keyways precisely on slotting machines according to DIN 6885. If you do it yourself, maintain axial alignment and the correct width and depth of the keyway so that the key sits securely and is not sheared off.

What should be considered when selecting a sprocket for low-temperature operation?

At low temperatures, carbon steel becomes more susceptible to brittle fracture under impact, so in cold stores and freezers it is worth considering a variant with increased impact strength or consulting the supplier on the choice of material. Equally important is the choice of a lubricant that will not thicken or lose its lubricating properties at low temperature.

How can you check whether the chain in an existing drive is already excessively elongated (stretched)?

Stretch out a section of a dozen or so chain links and compare its length with the catalogue dimension - an elongation of more than approx. 2-3% means the chain is due for replacement. A stretched chain no longer seats properly on the sprocket teeth, which accelerates the wear of both components, so it is better to replace it before it damages the sprocket as well.

Where is this product used?

28B-3 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.