Log in

Price Inquiry

New Cart 0 €

Your cart is empty

Sprocket 28B-2 (1 3/4") z=8 with hub, C45 steel

Availability:
Shipping from €

Available product promotions:

Added To Cart

  • Weight
    9kg
  • UPC Code
    5907009385204
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm
  • Product Description
  • Product Features
  • Add to the product comparison toolCompare
Added to the product comparison tool
You may add 2 to 4 products
You may add 4 products maximum
Go to Comparison Tool

Product Description

Sprocket 28B-2 (1 3/4") z=8 with hub, C45 steel works with 28B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 44.45 mm (1 3/4"). It has 8 teeth and is made of C45 steel.

The sprocket has a one-sided hub with a diameter of 74 mm and a pilot bore of Ø25 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 120 mm.

Technical data

Chain28B-2 (DIN 8187 / ISO 606)
Pitch44.45 mm (1 3/4")
Chain inner width30.99 mm
Roller diameter27.94 mm
Number of teeth8
Pitch diameter Dp116.15 mm
Outside diameter De132 mm
Typesprocket with hub
Hub diameter d74 mm
Pilot bore D25 mm
Total width H120 mm
Tooth width88.4 mm
MaterialC45 steel
Weight9 kg
EAN5907009385204

Applications

It is found in transmissions of industrial machinery that transfer high torque. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does the 28B-2 z=8 sprocket fit?

28B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 44.45 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 140 chain?

No. ASA 140 chain (American standard) has the same pitch, but a different roller diameter (25.4 mm instead of 27.94 mm) and a different inner width (25.4 mm instead of 30.99 mm). The 28B sprocket is designed for European-standard chain, so the two systems should not be mixed.

When does a sprocket need replacing?

It should be replaced when the teeth start to look like pointed shark fins or are clearly bent to one side. Running on such a profile quickly destroys even a new chain, so a worn sprocket must be replaced.

Can a new chain be fitted on a worn sprocket?

This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.

What causes wear on the sides of the teeth?

Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.

Product Features

  • Weight
    9kg
  • UPC Code
    5907009385204
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm

Responsible Entity

Manufacturer

Ozdowski Sp. z o.o.

Zajęcza 4H

57-300 Kłodzko, Poland

Responsible Person

Paweł Ozdowski

Zajęcza 4H

57-300 Kłodzko, Poland