Sprocket 28B-2 (1 3/4") z=8 plate wheel, C45 steel

Product Description

Sprocket 28B-2 (1 3/4") z=8 plate wheel, C45 steel fits 28B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 44.45 mm (1 3/4"). It has 8 teeth and is made of C45 steel.

The plate wheel has a pilot bore of Ø25 mm. It can be bolted or welded to your own hub, flange or drum, which makes it a good choice for larger ratios and non-standard designs.

Technical data

Applications

It is found in transmissions of industrial machinery that transfer high torque. The double-strand version carries higher loads than a single-strand one of the same pitch. Plate wheels are often mounted on drums and flanges and in large reduction gears.

Frequently asked questions

Which chain does the 28B-2 z=8 sprocket fit?

28B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 44.45 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 140 chain?

No. ASA 140 chain (American standard) has the same pitch, but a different roller diameter (25.4 mm instead of 27.94 mm) and a different inner width (25.4 mm instead of 30.99 mm). The 28B sprocket is designed for European-standard chain, so the two systems should not be mixed.

When are multi-strand sprockets used?

Double- and triple-strand sprockets work with multi-strand chains in heavily loaded drives where there is no room for a chain with a larger pitch. Several strands share the load evenly, which reduces wear and the risk of chain breakage.

How do I check the pitch of a sprocket?

The sprocket pitch matches the chain pitch - it is the distance between the centres of adjacent teeth measured on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket: it should sit on the teeth without tension. This sprocket has a pitch of 44.45 mm (1 3/4").

How is the pitch diameter of a sprocket calculated?

The pitch diameter Dp is the circle along which the chain rollers travel. It is calculated with the formula: pitch divided by the sine of (180° / number of teeth). For this sprocket it is 116.15 mm, and the outside diameter De is 132 mm.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.