Sprocket 28B-1 z=28 with hub

Product Description

Sprocket 28B-1 z=28, with hub

Sprocket 28B-1, simplex, with 28 teeth and a hub - pitch 1 3/4" (44.45 mm). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

How should large-diameter sprockets be transported and stored to prevent deformation?

Large sprockets are best stored and transported lying flat on a level, stable surface, rather than resting on the toothed rim alone, which is more susceptible to local deformation. When lifting, it is advisable to use slings passed through the hub bore rather than hooking them onto individual teeth.

How do sprockets for roller chains differ from sprockets for toothed chains (silent chain)?

A sprocket for roller chain has a rounded tooth root matched to the chain roller (profile according to DIN 8187), whereas a sprocket for toothed chain (silent chain) has a flat, trapezoidal tooth profile that engages the chain plates instead of rollers. These two systems are not interchangeable.

What forces act on the key in a sprocket and how can it be prevented from shearing?

The key transmits the entire shearing torque between the shaft and the sprocket. Make sure it is made of suitable quenched and tempered steel, has an accurate fit in the keyway and that the machine is not subjected to extreme jerks without an overload clutch.

Is a sprocket with hub suitable for reversing drives (with a change of rotation direction)?

Yes, the tooth geometry of a sprocket is symmetrical and has no preferred direction of operation, so the sprocket can be used in drives that change direction of rotation. In such systems, correct chain tension on both sides is particularly important, because when reversing, each side alternately becomes the working side.

Where is this product used?

28B-1 sprockets operate in drives of construction machinery, goods lifts, aggregate conveyors and woodworking machines - wherever tooth durability under load matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.