Sprocket 24B-3 z=20 with hub

Product Description

Sprocket 24B-3 z=20, with hub

The sprocket 24B-3 shown is a triplex (three-strand) sprocket with 20 teeth, made with a hub, for chain with a pitch of 1 1/2" / 38.1 mm. Manufactured in accordance with DIN 8187 / ISO 606 from C45E structural steel (EN 10083-1), without tooth hardening - as a Polish manufacturer, Ozdowski supplies an economical version that is fully dimensionally interchangeable with the hardened variant of the same pitch.

Technical data

Frequently asked questions

What does the marking "z=X" on a sprocket mean and why is it so important when ordering?

"z" is the number of teeth of the sprocket - together with the pitch and the number of chain strands, it unambiguously defines the sprocket geometry (pitch circle and outside diameter). Ordering a sprocket with the wrong "z" usually means that it will not work correctly with the second sprocket already in the machine, and a different transmission ratio than intended will result.

If I order today, when will I receive the product?

Information on the lead time is given next to the product's stock level, above the price. If the sprocket is available in the main warehouse, we ship it no later than the next working day.

How important is the concentricity of the hub bore relative to the toothed rim?

If the hub bore is not machined concentrically with the toothed rim, the sprocket will "run out" during operation - the teeth will engage the chain at a varying angle, which accelerates their wear and generates additional vibration. That is why boring out the pilot bore must be done on a lathe, clamping the sprocket by the hub or rim, and not "by eye".

How can a sprocket and chain be protected against corrosion during storage?

After cleaning off any dirt, it is advisable to apply a layer of preservative grease or anti-corrosion oil and store the sprocket in a dry place not exposed to condensation. In the steel version (without coating), even a short damp break in the workshop can cause a rusty film on the tooth surfaces.

Where is this product used?

Typical applications of the 24B-3 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.