Log in

Price Inquiry

New Cart 0 €

Your cart is empty

Sprocket 24B-1 (1 1/2") z=68 plate wheel, C45 steel

Availability:
Shipping from €

Available product promotions:

Added To Cart

  • Weight
    96kg
  • UPC Code
    5907009368757
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm
  • Product Description
  • Product Features
  • Add to the product comparison toolCompare
Added to the product comparison tool
You may add 2 to 4 products
You may add 4 products maximum
Go to Comparison Tool

Product Description

Sprocket 24B-1 (1 1/2") z=68 plate wheel, C45 steel works with 24B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 38.1 mm (1 1/2"). It has 68 teeth and is made of C45 steel.

The plate wheel has a pilot bore of Ø40 mm. It can be bolted or welded to your own hub, flange or drum, which makes it a good choice for larger ratios and non-standard designs.

Technical data

Chain24B-1 (DIN 8187 / ISO 606)
Pitch38.1 mm (1 1/2")
Chain inner width25.4 mm
Roller diameter25.4 mm
Number of teeth68
Pitch diameter Dp824.98 mm
Outside diameter De839.8 mm
Typeplate wheel (no hub)
Pilot bore D40 mm
Tooth width24.1 mm
MaterialC45 steel
Weight96 kg
EAN5907009368757

Applications

It works in drives of lifts, winches and heavy chain conveyors. Plate wheels are often mounted on drums and flanges and in large reduction gears.

Frequently asked questions

Which chain does the 24B-1 z=68 sprocket fit?

24B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 38.1 mm. A simplex sprocket requires a single-strand (simplex) chain.

Does it fit ASA 120 chain?

No. ASA 120 chain (American standard) has the same pitch, but a different roller diameter (22.22 mm instead of 25.4 mm). The 24B sprocket is designed for European-standard chain, so the two systems should not be mixed.

Can a new chain be fitted on a worn sprocket?

This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.

What causes wear on the sides of the teeth?

Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.

How do I check sprocket run-out after installation?

A dial indicator on a magnetic stand is used. Place the tip against the rim or side of the sprocket and turn the shaft, reading the deviations. Excessive run-out usually means a crooked bore or a damaged shaft.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.

Product Features

  • Weight
    96kg
  • UPC Code
    5907009368757
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm

Responsible Entity

Manufacturer

Ozdowski Sp. z o.o.

Zajęcza 4H

57-300 Kłodzko, Poland

Responsible Person

Paweł Ozdowski

Zajęcza 4H

57-300 Kłodzko, Poland