Sprocket 20B-3 (1 1/4") z=11 with hub, C45 steel

Product Description

Sprocket 20B-3 (1 1/4") z=11 with hub, C45 steel is designed for 20B-3 roller chain (European standard DIN 8187 / ISO 606), triple-strand (triplex), with a pitch of 31.75 mm (1 1/4"). It has 11 teeth and is made of C45 steel.

The sprocket has a one-sided hub with a diameter of 80 mm and a pilot bore of Ø20 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 115 mm.

Technical data

Applications

It works well in high-power agricultural machinery, presses and feeder drives in processing plants. The triple-strand version is chosen for very heavily loaded drives where there is no room for a chain with a larger pitch.

Frequently asked questions

Which chain does the 20B-3 z=11 sprocket fit?

20B-3 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 31.75 mm. A triplex sprocket requires a triple-strand (triplex) chain.

Does it fit ASA 100 chain?

No. ASA 100 chain (American standard) has the same pitch and roller diameter, but a different inner width (19.05 mm instead of 19.56 mm). The 20B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How is the pitch diameter of a sprocket calculated?

The pitch diameter Dp is the circle along which the chain rollers travel. It is calculated with the formula: pitch divided by the sine of (180° / number of teeth). For this sprocket it is 112.68 mm, and the outside diameter De is 127.8 mm.

When should I choose a sprocket with hub and when a plate wheel?

A sprocket with hub is chosen when it transmits torque directly from the shaft via a key - the hub provides a longer contact surface with the shaft and a more stable fit. Plate wheels are used mainly when the wheel is fixed to an existing flange or drum, or when there is little space on the shaft.

How does the number of teeth affect the drive ratio?

The ratio is the number of teeth of the driven wheel divided by the number of teeth of the driving wheel. If this sprocket drives a wheel with twice as many teeth, the driven shaft turns twice as slowly but with roughly twice the torque.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.