Sprocket 20B-2 (1 1/4") z=57 with hub, steel

Product Description

Sprocket 20B-2 (1 1/4") z=57 with hub, steel works with 20B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 31.75 mm (1 1/4"). It has 57 teeth and is made of structural steel.

The sprocket has a one-sided hub with a diameter of 180 mm, welded to the plate, and a pilot bore of Ø40 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 116 mm.

Technical data

Applications

It works well in high-power agricultural machinery, presses and feeder drives in processing plants. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does the 20B-2 z=57 sprocket fit?

20B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 31.75 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 100 chain?

No. ASA 100 chain (American standard) has the same pitch and roller diameter, but a different inner width (19.05 mm instead of 19.56 mm). The 20B sprocket is designed for European-standard chain, so the two systems should not be mixed.

When does a sprocket need replacing?

It should be replaced when the teeth start to look like pointed shark fins or are clearly bent to one side. Running on such a profile quickly destroys even a new chain, so a worn sprocket must be replaced.

Can a new chain be fitted on a worn sprocket?

This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.

What causes wear on the sides of the teeth?

Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.