Sprocket 20B-1 z=57 with hub

Product Description

Sprocket 20B-1 z=57, with hub

Simplex sprocket 20B-1 with hub, 57 teeth - designed for chain with a pitch of 1 1/4" (31.75 mm). Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with a chain of the same pitch; the sprocket is made of C45E steel (EN 10083-1) in a non-hardened version - the standard choice for applications with moderate and medium load.

Technical data

Frequently asked questions

How does a sprocket differ from a module spur gear?

A sprocket works with a roller chain and has a tooth profile matched to the chain rollers (standard DIN 8187/ISO 606), whereas a module spur gear meshes directly with another gear or a gear rack, has an involute tooth profile and parameters described by the module (standard DIN 780/ISO 54). These are two different power transmission systems, not interchangeable with each other.

How can you check whether the chain in an existing drive is already excessively elongated (stretched)?

Stretch out a section of a dozen or so chain links and compare its length with the catalogue dimension - an elongation of more than approx. 2-3% means the chain is due for replacement. A stretched chain no longer seats properly on the sprocket teeth, which accelerates the wear of both components, so it is better to replace it before it damages the sprocket as well.

Can the hub of a sprocket have a different hardness from the toothed rim?

Yes, and in practice this is usually the case - in the version with induction-hardened teeth, only the toothed rim is hardened, while the hub remains soft so that it can be freely turned and a keyway can be cut in it. This solution combines tooth wear resistance with ease of machining the hub.

What is the relationship between the number of teeth of a sprocket and the rotational speed of the drive?

This is the basic principle of the transmission ratio. If there is a small sprocket on the motor (drive) and a large one on the machine, the machine will turn more slowly but gain proportionally greater torque (force).

Where is this product used?

Typical applications of the 20B-1 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.