Sprocket 16B-3 z=50 with hub

Product Description

Sprocket 16B-3 z=50, with hub

Sprocket 16B-3, triplex (three-strand), with 50 teeth and a hub - pitch 1" (25.4 mm). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

Is it possible to order a single trial piece of the sprocket before placing a larger order?

Yes, catalogue items can be ordered in any quantity, including a single piece for testing or verification before a larger series order.

How does one duplex sprocket differ from two independent simplex sprockets on a common shaft?

A duplex sprocket is a single, monolithic toothed rim serving a duplex chain, in which both strands are mechanically integrated in one component. Two independent simplex sprockets on a common shaft serve two completely separate simplex chains - these solutions are not interchangeable without changing the chain type.

How can you recognise a sprocket not made in accordance with the DIN 8187 profile?

Most often it is visible from the incorrect seating of the chain on the teeth - the chain "sits" on the tooth tips or too deep in the tooth roots, despite the correct pitch. In that case, it is worth placing a section of a known reference chain of this pitch on the sprocket and checking whether it engages each tooth evenly and smoothly.

How often should chain tension be checked on a machine in operation?

In machines operating continuously, it is advisable to check the tension every few weeks, and in a newly installed drive - as early as after the first hours of operation, when the chain "beds in". A correctly tensioned chain has a slight, visible sag on the slack side - too tight a chain accelerates bearing wear, while too loose a chain increases the risk of it jumping off the sprocket.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.