Sprocket 16B-3 z=27 with hub

Product Description

Sprocket 16B-3 z=27, with hub

Sprocket 16B-3 (pitch 1" - 25.4 mm), triplex (three-strand), 27 teeth, with hub. Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with a chain of the same pitch; the sprocket is made of C45E steel (EN 10083-1) in a non-hardened version - the standard choice for applications with moderate and medium load.

Technical data

Frequently asked questions

How do you select the number of teeth on the driving and driven sprockets to obtain the required ratio?

The ratio is calculated as the quotient of the number of teeth on the driven sprocket and the number of teeth on the driving sprocket. For example, to halve the rotational speed, the driven sprocket should have twice as many teeth as the driving sprocket - both sprockets must have the same pitch and number of strands.

Does a sprocket with hub have a fixed mounting side, or can it be reversed?

The sprocket is usually symmetrical with respect to the plane of the rim, so the rim itself cannot be "reversed incorrectly" - but the hub is usually on only one side of the sprocket, which determines which way the sprocket must be mounted relative to other components on the shaft (e.g. bearings, other sprockets).

How do I bore the hole in a sprocket to fit a motor shaft?

A sprocket with a pilot bore should be clamped in a lathe (gripping the hub to avoid runout) and bored to the required diameter with an H7 tolerance. The hub is usually soft and easy to machine, even in the version with hardened teeth.

How long can a sprocket be kept in storage without losing its properties?

A properly preserved sprocket (dried, coated with grease or anti-corrosion oil, stored in a dry room) can be kept in storage for many years without any loss of its mechanical parameters. The only risk is surface corrosion due to improper storage - it does not affect the tooth geometry, but it is advisable to clean the sprocket and preserve it again before installation.

Where is this product used?

16B-3 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.