Sprocket 16B-2 z=38 with hub, Cast iron

Product Description

Sprocket 16B-2 z=38, with cast iron hub

Duplex sprocket 16B-2 with hub, 38 teeth - designed for chain with a pitch of 1" (25.4 mm). The material is grey cast iron - an economical solution with good vibration damping that proves itself in drives running at constant speed; the hub has a pilot bore that must be bored out individually to suit the shaft.

Technical data

Frequently asked questions

How does one duplex sprocket differ from two independent simplex sprockets on a common shaft?

A duplex sprocket is a single, monolithic toothed rim serving a duplex chain, in which both strands are mechanically integrated in one component. Two independent simplex sprockets on a common shaft serve two completely separate simplex chains - these solutions are not interchangeable without changing the chain type.

What does the marking "z=X" on a sprocket mean and why is it so important when ordering?

"z" is the number of teeth of the sprocket - together with the pitch and the number of chain strands, it unambiguously defines the sprocket geometry (pitch circle and outside diameter). Ordering a sprocket with the wrong "z" usually means that it will not work correctly with the second sprocket already in the machine, and a different transmission ratio than intended will result.

Does a larger number of teeth always mean a longer service life for the sprocket?

Largely yes - the more teeth are engaged, the lower the load on each individual tooth, and the chain runs over a larger wrap angle, which reduces dynamic impacts. Very small sprockets (with fewer than fifteen or so teeth) wear the fastest and are best avoided if the drive design allows.

Do you offer sprockets made to custom dimensions, outside the catalogue?

Yes, in addition to catalogue items we also manufacture sprockets to individual drawings or customer requirements - please contact the sales department and provide the required parameters (pitch, number of teeth, hub dimensions, material).

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

16B-2 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.