Sprocket 16B-2 z=15 with hub, hardened

Product Description

Sprocket 16B-2 z=15, hardened hub

Duplex sprocket 16B-2 with hardened hub, 15 teeth - dedicated to a chain with a pitch of 1" (25.4 mm). Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with chain of the same pitch; C45E steel (EN 10083-1) and induction hardening of the teeth (45-55 HRC) provide high wear resistance while keeping the hub machinable.

Technical data

Frequently asked questions

How does a hardness of around 45-55 HRC on the teeth extend the service life of the sprocket-chain system?

A hardness of 45-55 HRC matched to the hardened chain rollers is the optimal combination. The sprocket and chain wear slowly and evenly, and the sprocket does not turn into a "blade" that could shear the chain during operation.

How do you cut a keyway in the hub of a sprocket?

We cut keyways precisely on slotting machines according to DIN 6885. If you do it yourself, maintain axial alignment and the correct width and depth of the keyway so that the key sits securely and is not sheared off.

How do I select a sprocket with bearing for a tensioning system?

An idler sprocket (with built-in bearing) is selected according to the pitch of the working chain and mounted on the slack side (not on the tight side). It is important that the bearing is protected against dust, especially in agricultural machinery.

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Where is this product used?

Applications include drives in the food industry, packaging machines, sorting lines and agricultural harvesting machines, where the sprocket operates seasonally but under full load.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.