Sprocket 16B-2 (1") z=12 plate wheel, C45 steel
Available product promotions:
-
Weight1,95kg
-
UPC Code5908453517210
Product Description
Sprocket 16B-2 (1") z=12 plate wheel, C45 steel works with 16B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 25.4 mm (1"). It has 12 teeth and is made of C45 steel.
The plate wheel has a pilot bore of Ø20 mm. It can be bolted or welded to your own hub, flange or drum, which makes it a good choice for larger ratios and non-standard designs.
Technical data
| Chain | 16B-2 (DIN 8187 / ISO 606) |
| Pitch | 25.4 mm (1") |
| Chain inner width | 17.02 mm |
| Roller diameter | 15.88 mm |
| Number of teeth | 12 |
| Pitch diameter Dp | 98.14 mm |
| Outside diameter De | 109 mm |
| Type | plate wheel (no hub) |
| Pilot bore D | 20 mm |
| Tooth width | 47.7 mm |
| Material | C45 steel |
| Weight | 1.95 kg |
| EAN | 5908453517210 |
Applications
It is found in transmissions of industrial machinery that transfer high torque. The double-strand version carries higher loads than a single-strand one of the same pitch. Plate wheels are often mounted on drums and flanges and in large reduction gears.
Frequently asked questions
Which chain does the 16B-2 z=12 sprocket fit?
16B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 25.4 mm. A duplex sprocket requires a double-strand (duplex) chain.
Does it fit ASA 80 chain?
No. ASA 80 chain (American standard) has the same pitch and roller diameter, but a different inner width (15.88 mm instead of 17.02 mm). The 16B sprocket is designed for European-standard chain, so the two systems should not be mixed.
Can a new chain be fitted on a worn sprocket?
This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.
What causes wear on the sides of the teeth?
Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.
How do I check sprocket run-out after installation?
A dial indicator on a magnetic stand is used. Place the tip against the rim or side of the sprocket and turn the shaft, reading the deviations. Excessive run-out usually means a crooked bore or a damaged shaft.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight1,95kg
-
UPC Code5908453517210