Sprocket 16B-1 z=14 with hub

Product Description

Sprocket 16B-1 z=14, with hub

Sprocket 16B-1, simplex, with 14 teeth and a hub - pitch 1" (25.4 mm). Manufactured in accordance with DIN 8187 / ISO 606 from C45E structural steel (EN 10083-1), without tooth hardening - as a Polish manufacturer, Ozdowski supplies an economical version that is fully dimensionally interchangeable with the hardened variant of the same pitch.

Technical data

Frequently asked questions

How do you select the number of teeth on the driving and driven sprockets to obtain the required ratio?

The ratio is calculated as the quotient of the number of teeth on the driven sprocket and the number of teeth on the driving sprocket. For example, to halve the rotational speed, the driven sprocket should have twice as many teeth as the driving sprocket - both sprockets must have the same pitch and number of strands.

Is it worth using guards on sprockets and the entire drive?

Yes - a guard protects operators from contact with moving parts and at the same time limits the ingress of dust and moisture to the chain, which genuinely extends its service life. In many industrial machines, a chain drive guard is also an occupational safety requirement.

What causes premature wear of the side faces of the teeth?

This is most often the result of misalignment of the sprockets on the shafts (so-called lateral runout of the drive). The chain does not run straight, and its inner plates catch on the sides of the teeth, wearing them down to bare metal. The system must be realigned immediately.

What is the standard procedure for submitting a complaint about a sprocket?

It is advisable to contact customer service, providing the product code, order number, and a description and photos of the observed defect - this makes it possible to quickly assess whether the complaint is justified and to propose further steps.

Where is this product used?

Applications include drives in the food industry, packaging machines, sorting lines and agricultural harvesting machines, where the sprocket operates seasonally but under full load.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.