Sprocket 12B-3 z=40 with hub

Product Description

Sprocket 12B-3 z=40, with hub

Sprocket 12B-3 with hub, 40 teeth, triplex (three-strand) - a product matched to chain with a pitch of 19.05 mm (3/4"). Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with a chain of the same pitch; the sprocket is made of C45E steel (EN 10083-1) in a non-hardened version - the standard choice for applications with moderate and medium load.

Technical data

Frequently asked questions

Is a sprocket with hub suitable for reversing drives (with a change of rotation direction)?

Yes, the tooth geometry of a sprocket is symmetrical and has no preferred direction of operation, so the sprocket can be used in drives that change direction of rotation. In such systems, correct chain tension on both sides is particularly important, because when reversing, each side alternately becomes the working side.

How can you recognise an idler sprocket bearing that is starting to wear before it fails?

The first symptom is usually increased noise and noticeable, excessive play of the sprocket when it is moved by hand with the machine stopped. It is also worth periodically checking the temperature of the bearing housing during operation - an increase compared with other bearings in the system signals progressive wear.

What is the set screw hole in the hub for?

The threaded hole in the hub is used to screw in a headless screw (a so-called grub screw). It secures the sprocket against axial displacement along the shaft during machine vibration.

How do you correctly align sprockets during installation?

The driving and driven sprockets must be in one perfect line. You can use a long steel straightedge placed against the faces of both sprockets or a professional laser alignment tool. Even a slight angular deviation will quickly destroy the chain.

Where is this product used?

Typical applications of the 12B-3 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.