Sprocket 12B-3 z=17 with hub

Product Description

Sprocket 12B-3 z=17, with hub

Sprocket 12B-3, triplex (three-strand), with 17 teeth and a hub - pitch 3/4" (19.05 mm). The material is C45E carbon steel (EN 10083-1), and the teeth remain unhardened (without induction hardening) - in accordance with DIN 8187 / ISO 606; this version is easier to machine over the entire depth of the sprocket.

Technical data

Frequently asked questions

What happens when a sprocket operates under a greater load than intended?

Overloading first accelerates normal tooth wear, and with sudden overloads (e.g. machine blockage) the teeth may become permanently bent or sheared. In such cases, using an overload clutch in the system is often a better solution than choosing an oversized sprocket "just in case".

How can you tell whether a sprocket is still fit for further service or already due for replacement?

It is worth checking the tooth profile for visible chipping or the characteristic "hooked" shape, and also measuring the pitch circle diameter and comparing it with the catalogue dimension of a new sprocket. If the difference is visually noticeable or the chain starts to "jump", the sprocket is due for replacement.

What does the pitch of a sprocket mean and how can it be checked?

The pitch of a sprocket corresponds to the chain pitch - it is the theoretical distance between the centres of adjacent teeth on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket - it should sit perfectly, without tension.

How do you select a sprocket when the machine lacks space for a larger pitch?

In such a situation, a better solution than increasing the pitch is often to use a multi-strand chain and sprocket of the same (smaller) pitch - several strands together carry a greater load without increasing the sprocket diameter.

Where is this product used?

Typical applications of the 12B-3 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.