Sprocket 12B-2 z=8 with hub, hardened

Product Description

Sprocket 12B-2 z=8, hardened hub

Sprocket 12B-2 (pitch 3/4" - 19.05 mm), duplex, 8 teeth, with hardened hub. Made in accordance with DIN 8187 / ISO 606, from C45E steel (EN 10083-1), with teeth induction hardened to 45-55 HRC - as a Polish manufacturer, Ozdowski ensures that the hub remains soft and suitable for turning.

Technical data

Frequently asked questions

When does tooth wear (the "shark fin" profile) mean the sprocket must be replaced?

If the teeth resemble pointed, tilted shark fins, the sprocket must be replaced immediately. Operating on such a profile can damage even a brand-new chain within a dozen or so days.

What should be used to preserve sprockets before a longer break in operation?

After cleaning with a brush and a technical cleaner, apply preservative grease or a thick, moisture-displacing spray oil to the entire surface of the sprocket. This will protect the carbon steel against a rusty film during a break in the workshop.

How do I select a sprocket for a roller chain?

The selected sprocket must match the chain parameters exactly. Pay attention to three things: the standard (European B series), the pitch and the number of strands. The sprocket must have a tooth profile compliant with DIN 8187 so that the chain enters the tooth root smoothly without jamming.

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Where is this product used?

Typical applications of the 12B-2 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.