Sprocket 12B-2 z=76 for Taper-Lock bush 3020, C45 steel

Product Description

Sprocket 12B-2 z=76 for Taper-Lock bush 3020, C45 steel fits 12B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 19.05 mm (3/4"). It has 76 teeth and is made of C45 steel.

The sprocket has a seat for a Taper-Lock 3020 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 3020 bush with a bore that matches the shaft. The hub diameter is 140 mm and the total width of the sprocket is 51 mm. The bush is not included - the 3020 bush can be purchased separately from our range.

Technical data

Applications

It works in chain transmissions of industrial machinery where easy sprocket replacement is important. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does this sprocket fit?

12B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 19.05 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 60 chain?

No. ASA 60 chain (American standard) has the same pitch, but a different roller diameter (11.91 mm instead of 12.07 mm) and a different inner width (12.7 mm instead of 11.68 mm). The 12B sprocket is designed for European-standard chain, so the two systems should not be mixed.

Is this sprocket available in another version?

Yes. Also available: Sprocket 12B-2 z=76 for Taper-Lock bush 3020, cast iron.

How should sprockets be aligned during installation?

The driving and driven sprockets must lie in one plane. Alignment can be checked with a long steel straightedge placed against the sides of both wheels or with a laser alignment tool. Even a small misalignment wears the sides of the teeth and speeds up chain wear.

When does a sprocket need replacing?

When the teeth start to look like pointed shark fins or are clearly bent to one side. Running on such a profile quickly destroys even a new chain, so a worn sprocket must be replaced. Thanks to the Taper-Lock bush, replacement is quick.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.