Sprocket 12B-1 z=28 with hub

Product Description

Sprocket 12B-1 z=28, with hub

Sprocket 12B-1, simplex, with 28 teeth and a hub - pitch 3/4" (19.05 mm). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

What is the standard procedure for submitting a complaint about a sprocket?

It is advisable to contact customer service, providing the product code, order number, and a description and photos of the observed defect - this makes it possible to quickly assess whether the complaint is justified and to propose further steps.

What forces act on the key in a sprocket and how can it be prevented from shearing?

The key transmits the entire shearing torque between the shaft and the sprocket. Make sure it is made of suitable quenched and tempered steel, has an accurate fit in the keyway and that the machine is not subjected to extreme jerks without an overload clutch.

How can you recognise an idler sprocket bearing that is starting to wear before it fails?

The first symptom is usually increased noise and noticeable, excessive play of the sprocket when it is moved by hand with the machine stopped. It is also worth periodically checking the temperature of the bearing housing during operation - an increase compared with other bearings in the system signals progressive wear.

Can I replace a simplex sprocket with a duplex one without changing the other drive components?

No - switching to a duplex chain and sprocket requires replacing the entire set (the sprockets on both sides of the drive and the chain) with a duplex version of the same pitch, because the rim spacing and chain width differ from those of the simplex version.

Where is this product used?

12B-1 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.