Sprocket 12B-1 z=22 with hub stainless

Product Description

Sprocket 12B-1 z=22 with hub stainless - toothed wheel (sprocket) for 12B-1 roller chains with a pitch of 19.05 mm (3/4"), compliant with DIN 8187 / ISO 606. Made of stainless steel (inox).

The sprocket with a hub has a pilot bore of 20 mm, which can be bored out to the shaft size in H7 tolerance. The keyway is cut on a slotting machine to DIN 6885.

An inox sprocket is typically used in the food and beverage industry, on washing and packaging lines, and in the chemical industry.

When buying, please note the lead time - it is shown directly next to the product's stock level.

Stainless steel sprocket 12B-1, 22 teeth, with hub

FAQ

Is this inox sprocket suitable for the food industry?

Yes, this toothed wheel is made of stainless steel (inox), resistant to water and aggressive cleaning agents, which is a hygiene requirement in the food and chemical industries.

What is a pilot bore in a sprocket, and why is it left?

Sprockets with a hub have a small pilot (pre-drilled) bore. It is left on purpose so that any customer or workshop can bore it out precisely to the exact shaft size of their machine.

How to bore out the hole in a sprocket for a shaft?

The sprocket with a pilot bore should be clamped in a lathe (gripping the outer edge of the hub to avoid runout) and bored to the required diameter in H7 tolerance.

How to cut a keyway in the sprocket hub?

Keyways are cut precisely on slotting machines to DIN 6885. If you do it yourself, keep the alignment and the correct width and depth of the keyway so that the key sits firmly and is not sheared off.