Sprocket 12B-1 z=20 with hub, hardened

Product Description

Sprocket 12B-1 z=20, hardened hub

Simplex sprocket 12B-1 with hardened hub, 20 teeth - designed for chain with a pitch of 3/4" (19.05 mm). Sprocket compliant with DIN 8187 / ISO 606, milled from C45E steel (EN 10083-1); the teeth are induction hardened (45-55 HRC), while the core and hub remain soft, allowing the bore to be safely machined to the shaft size.

Technical data

Frequently asked questions

How do I select a sprocket for a roller chain?

The selected sprocket must match the chain parameters exactly. Pay attention to three things: the standard (European B series), the pitch and the number of strands. The sprocket must have a tooth profile compliant with DIN 8187 so that the chain enters the tooth root smoothly without jamming.

What causes premature wear of the side faces of the teeth?

This is most often the result of misalignment of the sprockets on the shafts (so-called lateral runout of the drive). The chain does not run straight, and its inner plates catch on the sides of the teeth, wearing them down to bare metal. The system must be realigned immediately.

Can a sprocket be welded directly to the drive shaft?

Technically this is possible, but we strongly advise against such a solution. Welding overheats the material, damages nearby bearings, bends the shaft and prevents the worn sprocket from being easily replaced later. Always use mounting with a key or a clamping bush.

How do you correctly align sprockets during installation?

The driving and driven sprockets must be in one perfect line. You can use a long steel straightedge placed against the faces of both sprockets or a professional laser alignment tool. Even a slight angular deviation will quickly destroy the chain.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.