Sprocket 12B-1 (3/4") z=14 with bearing, C45 steel

Product Description

Sprocket 12B-1 (3/4") z=14 with bearing, C45 steel works with 12B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 19.05 mm (3/4"). It has 14 teeth and is made of C45 steel.

The sprocket runs on a bearing and is supplied as a ready-to-install assembly.

Technical data

Applications

The sprocket is installed as a tensioner on the slack side of the chain or as a return and guide sprocket. It is well suited to chain conveyors, packaging machines, agricultural machinery and drives with long centre distances, where the chain needs to be supported or redirected.

Frequently asked questions

Which chain does the 12B-1 z=14 sprocket with bearing fit?

12B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 19.05 mm. A simplex sprocket requires a single-strand (simplex) chain.

What is the difference between a sprocket with bearing and a standard sprocket?

A standard sprocket is mounted on a shaft and transmits drive. A sprocket with bearing rotates freely on a stationary pin, so it does not transmit torque - it is used to tension, support and redirect the chain.

Does it fit ASA 60 chain?

No. ASA 60 chain (American standard) has the same pitch, but a different roller diameter (11.91 mm instead of 12.07 mm) and a different inner width (12.7 mm instead of 11.68 mm). The 12B sprocket is designed for European-standard chain, so the two systems should not be mixed.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.