Sprocket 10B-3 z=22 with hub

Product Description

Sprocket 10B-3 z=22, with hub

Sprocket 10B-3, triplex (three-strand), with 22 teeth and a hub - pitch 5/8" (15.88 mm). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

Can the hub of a sprocket have a different hardness from the toothed rim?

Yes, and in practice this is usually the case - in the version with induction-hardened teeth, only the toothed rim is hardened, while the hub remains soft so that it can be freely turned and a keyway can be cut in it. This solution combines tooth wear resistance with ease of machining the hub.

How do I check the radial and axial runout of a sprocket after mounting it on the shaft?

A dial indicator on a magnetic stand is used for the measurement. Place the tip against the circumference of the sprocket or its side face, rotate the shaft and check the deviations. Excessive runout indicates faulty installation or a damaged shaft.

Do I need to select dedicated bearings for a sprocket with hub?

A sprocket with hub mounted with a key does not require its own bearings - the load is carried by the bearings of the shaft on which the sprocket is mounted. A dedicated bearing built into the sprocket is only needed for tensioning or guide sprockets mounted on an axle without its own drive.

Does a sprocket with hub have a fixed mounting side, or can it be reversed?

The sprocket is usually symmetrical with respect to the plane of the rim, so the rim itself cannot be "reversed incorrectly" - but the hub is usually on only one side of the sprocket, which determines which way the sprocket must be mounted relative to other components on the shaft (e.g. bearings, other sprockets).

Where is this product used?

10B-3 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.