Sprocket 10B-2 z=24 for Taper-Lock bush 2012

Product Description

Sprocket 10B-2 z=24 for Taper-Lock bush 2012 fits 10B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 15.875 mm (5/8"). It has 24 teeth and is made of C45 steel.

The sprocket has a seat for a Taper-Lock 2012 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 2012 bush with a bore that matches the shaft. The bush is not included - the 2012 bush can be purchased separately from our range.

Technical data

Applications

It is used in woodworking machinery, winches and internal transport equipment. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does this sprocket fit?

10B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 15.875 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 50 chain?

No. ASA 50 chain (American standard) has the same pitch and roller diameter, but a different inner width (9.52 mm instead of 9.65 mm). The 10B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How can run-out be avoided after mounting the bush?

Cleanliness of the shaft, the bush and the sprocket seat is crucial. Even a small chip between the bush taper and the sprocket causes run-out, which accelerates wear of the chain and bearings.

Does the bush connection need to be checked during operation?

Yes. After the first period of operation, and later during inspections, it is worth checking that the bush screws are tight. In drives operating at higher temperatures, a check after the first warm-up is especially important.

Can a Taper-Lock bush be reused?

Yes, if it has not been mechanically damaged. Easy dismounting and remounting is one of the main advantages of this system.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.