Sprocket 10B-1 z=45 with hub, Cast iron

Product Description

Sprocket 10B-1 z=45, with cast iron hub

The sprocket 10B-1 shown is a simplex sprocket with 45 teeth, made with a hub, for chain with a pitch of 5/8" / 15.88 mm. The sprocket is made of grey cast iron - a traditional material for sprockets in applications with moderate loads and lower rotational speeds; the bore in the hub is a pilot bore intended to be machined to the shaft size.

Technical data

Frequently asked questions

How do I select a sprocket for a roller chain?

The selected sprocket must match the chain parameters exactly. Pay attention to three things: the standard (European B series), the pitch and the number of strands. The sprocket must have a tooth profile compliant with DIN 8187 so that the chain enters the tooth root smoothly without jamming.

How should large-diameter sprockets be transported and stored to prevent deformation?

Large sprockets are best stored and transported lying flat on a level, stable surface, rather than resting on the toothed rim alone, which is more susceptible to local deformation. When lifting, it is advisable to use slings passed through the hub bore rather than hooking them onto individual teeth.

When should I choose a sprocket with hub and when a flat one (plate wheel)?

Flat sprockets (plate wheels) are most often used where they are mounted onto an existing flange or drum, or when there is extremely little space on the shaft. We choose a sprocket with hub when it must reliably transmit high torque directly from the shaft via a key - the hub provides a longer contact surface.

What is the standard procedure for submitting a complaint about a sprocket?

It is advisable to contact customer service, providing the product code, order number, and a description and photos of the observed defect - this makes it possible to quickly assess whether the complaint is justified and to propose further steps.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

10B-1 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.