Sprocket 10B-1 z=34 with hub, hardened

Product Description

Sprocket 10B-1 z=34, hardened hub

Sprocket 10B-1 (pitch 5/8" - 15.875 mm), simplex, 34 teeth, with hardened hub. Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with chain of the same pitch; C45E steel (EN 10083-1) and induction hardening of the teeth (45-55 HRC) provide high wear resistance while keeping the hub machinable.

Technical data

Frequently asked questions

How do I bore the hole in a sprocket to fit a motor shaft?

A sprocket with a pilot bore should be clamped in a lathe (gripping the hub to avoid runout) and bored to the required diameter with an H7 tolerance. If the sprocket has hardened teeth, the hub is usually soft and easy to machine.

What material is this sprocket made of?

As standard, it is carbon steel C45E (EN 10083-1) - a good material for typical industrial applications, providing a good balance between strength and machinability of the hub.

When does tooth wear (the "shark fin" profile) mean the sprocket must be replaced?

If the teeth resemble pointed, tilted shark fins, the sprocket must be replaced immediately. Operating on such a profile can damage even a brand-new chain within a dozen or so days.

How do I select a sprocket with bearing for a tensioning system?

An idler sprocket (with built-in bearing) is selected according to the pitch of the working chain and mounted on the slack side (not on the tight side). It is important that the bearing is protected against dust, especially in agricultural machinery.

Where is this product used?

Typical applications of the 10B-1 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.