Sprocket 10B-1 z=28 with hub stainless

Product Description

Sprocket 10B-1 z=28 with hub stainless - sprocket for a 10B-1 roller chain (DIN 8187 / ISO 606 standard), pitch 15.875 mm (5/8"). This toothed wheel is made of stainless steel (inox).

The sprocket with a hub has a pilot bore of 20 mm, which can be bored out to the shaft size in H7 tolerance. The keyway is cut on a slotting machine to DIN 6885.

This toothed wheel made of inox suits machines working in humid or aggressive environments: food processing, beverages, chemicals, industrial washers.

When buying, please note the lead time - it is shown directly next to the product's stock level.

Inox sprocket with hub for 10B-1 chain, 28 teeth

FAQ

Is this inox sprocket suitable for the food industry?

Yes, this toothed wheel is made of stainless steel (inox), resistant to water and aggressive cleaning agents, which is a hygiene requirement in the food and chemical industries.

What is the hole for a set screw in the hub for?

The threaded hole (often above the keyway or at 90 degrees) takes a grub screw. It prevents the sprocket from shifting along the shaft during machine vibrations.

When should you choose a sprocket with a hub and when a plate wheel?

Plate wheels are most often used where they are mounted to an existing flange or drum, or when there is very little space on the shaft. Sprockets with a hub are chosen when the wheel must transmit high torque directly from the shaft through a key - the hub gives a longer contact surface.

How to align sprockets correctly during installation?

The driving and the driven sprocket must lie in one line. For alignment use a long steel ruler laid against both sprockets or an alignment laser. Even a small angular deviation quickly destroys the chain.