Sprocket 10A-1 (50-1) z=11 with hub
Available product promotions:
-
Weight0,3kg
-
UPC Code5908453540553
Product Description
Sprocket 10A-1 (50-1) z=11 with hub works with ASA 50 (10A-1) roller chain, single-strand (simplex), with a pitch of 15.875 mm (5/8"). It has 11 teeth and is made of C45 steel in accordance with ISO 606 and ANSI B29.1.
The sprocket has a one-sided hub with a diameter of 37 mm and a pilot bore of Ø12 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 30 mm.
Technical data
| Chain | ASA 50-1 / 10A-1 |
| Pitch | 15.875 mm (5/8") |
| Chain inner width | 9.52 mm |
| Roller diameter | 10.16 mm |
| Number of teeth | 11 |
| Pitch diameter Dp | 56.34 mm |
| Outside diameter De | 63 mm |
| Type | sprocket with hub |
| Hub diameter d | 37 mm |
| Pilot bore D | 12 mm |
| Total width H | 30 mm |
| Tooth width | 9 mm |
| Material | C45 steel |
| Weight | 0.3 kg |
| EAN | 5908453540553 |
Applications
It works in food and packaging industry machinery and in internal transport equipment.
Frequently asked questions
Which chain does this sprocket fit?
ASA 50-1 (10A-1) roller chain with a pitch of 15.875 mm. A simplex sprocket requires a single-strand (simplex) chain.
Does it fit 10B chain?
No. 10B chain (European standard) has the same pitch and roller diameter, but a different inner width (9.65 mm instead of 9.52 mm). The ASA 50 sprocket is designed for American-standard chain, so the two systems should not be mixed.
How does the number of teeth affect the drive ratio?
The ratio is the number of teeth of the driven wheel divided by the number of teeth of the driving wheel. If this sprocket drives a wheel with twice as many teeth, the driven shaft turns twice as slowly but with roughly twice the torque.
Why does the sprocket have a pilot bore and how is it machined?
The pilot bore of Ø12 mm is left on purpose so that it can be bored precisely to the machine shaft size. The sprocket is clamped in a lathe by the outer edge of the hub to avoid run-out, and the bore is usually machined to H7 tolerance. The maximum bore diameter depends on the hub diameter (37 mm).
How is a keyway cut in the hub?
The keyway is made to DIN 6885, keeping it aligned and with the correct width and depth so that the key sits firmly. The key should fit accurately - play in the keyway accelerates wear and, under shock loads, can lead to the key shearing off.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight0,3kg
-
UPC Code5908453540553