Sprocket 08B-3 z=50 with hub

Product Description

Sprocket 08B-3 z=50, with hub

The sprocket 08B-3 shown is a triplex (three-strand) sprocket with 50 teeth, made with a hub, for chain with a pitch of 1/2" / 12.7 mm. Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with a chain of the same pitch; the sprocket is made of C45E steel (EN 10083-1) in a non-hardened version - the standard choice for applications with moderate and medium load.

Technical data

Frequently asked questions

Can the hub of a sprocket have a different hardness from the toothed rim?

Yes, and in practice this is usually the case - in the version with induction-hardened teeth, only the toothed rim is hardened, while the hub remains soft so that it can be freely turned and a keyway can be cut in it. This solution combines tooth wear resistance with ease of machining the hub.

How do sprockets for roller chains differ from sprockets for toothed chains (silent chain)?

A sprocket for roller chain has a rounded tooth root matched to the chain roller (profile according to DIN 8187), whereas a sprocket for toothed chain (silent chain) has a flat, trapezoidal tooth profile that engages the chain plates instead of rollers. These two systems are not interchangeable.

How should large-diameter sprockets be transported and stored to prevent deformation?

Large sprockets are best stored and transported lying flat on a level, stable surface, rather than resting on the toothed rim alone, which is more susceptible to local deformation. When lifting, it is advisable to use slings passed through the hub bore rather than hooking them onto individual teeth.

How does material quality prevent the teeth from "shearing" during sudden machine jerks?

Soft, uncertified sheet metal deforms under a sudden jerk - the teeth bend over. Steel from a certified melt, correctly heat-treated, has a high yield strength and withstands a torque surge without permanent deformation.

Where is this product used?

08B-3 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.