Sprocket 08B-3 z=36 with hub

Product Description

Sprocket 08B-3 z=36, with hub

The sprocket 08B-3 shown is a triplex (three-strand) sprocket with 36 teeth, made with a hub, for chain with a pitch of 1/2" / 12.7 mm. As a European manufacturer, Ozdowski supplies the sprocket in C45E steel (EN 10083-1), in accordance with DIN 8187 / ISO 606 - a version without tooth hardening, cheaper than the hardened variant and sufficient for many typical industrial applications.

Technical data

Frequently asked questions

Will a sprocket from another manufacturer work properly with the chain I already have?

If the sprocket is made to the same standard (DIN 8187/ISO 606) and has the same pitch and number of strands, it should work properly with a chain of another brand - that is the purpose of standardisation in this industry. However, differences between manufacturers may concern, for example, hub dimensions or material, so these parameters are worth checking separately.

Can a sprocket be welded directly to the drive shaft?

Technically this is possible, but we strongly advise against such a solution. Welding overheats the material, damages nearby bearings, bends the shaft and prevents the worn sprocket from being easily replaced later. Always use mounting with a key or a clamping bush.

How can you tell whether a sprocket is still fit for further service or already due for replacement?

It is worth checking the tooth profile for visible chipping or the characteristic "hooked" shape, and also measuring the pitch circle diameter and comparing it with the catalogue dimension of a new sprocket. If the difference is visually noticeable or the chain starts to "jump", the sprocket is due for replacement.

When is it worth using a clamping bush (Taper Bush) for a sprocket?

Wherever fast assembly matters. A clamping bush eliminates the need for laborious boring of the hub and cutting of a keyway - you insert the sprocket, tighten the screws and the machine is back in operation within minutes.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.