Sprocket 08B-3 z=19 with hub

Product Description

Sprocket 08B-3 z=19, with hub

Sprocket 08B-3 with hub, 19 teeth, triplex (three-strand) - a product matched to chain with a pitch of 12.7 mm (1/2"). Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with a chain of the same pitch; the sprocket is made of C45E steel (EN 10083-1) in a non-hardened version - the standard choice for applications with moderate and medium load.

Technical data

Frequently asked questions

What should be considered when selecting a sprocket for low-temperature operation?

At low temperatures, carbon steel becomes more susceptible to brittle fracture under impact, so in cold stores and freezers it is worth considering a variant with increased impact strength or consulting the supplier on the choice of material. Equally important is the choice of a lubricant that will not thicken or lose its lubricating properties at low temperature.

How often should chain tension be checked on a machine in operation?

In machines operating continuously, it is advisable to check the tension every few weeks, and in a newly installed drive - as early as after the first hours of operation, when the chain "beds in". A correctly tensioned chain has a slight, visible sag on the slack side - too tight a chain accelerates bearing wear, while too loose a chain increases the risk of it jumping off the sprocket.

Can the hub of a sprocket have a different hardness from the toothed rim?

Yes, and in practice this is usually the case - in the version with induction-hardened teeth, only the toothed rim is hardened, while the hub remains soft so that it can be freely turned and a keyway can be cut in it. This solution combines tooth wear resistance with ease of machining the hub.

How can you check that the sprocket meshes correctly with the chain when the machine is started for the first time?

At low speed (e.g. turning the shaft by hand), it is worth observing whether the chain enters and leaves the teeth smoothly around the entire circumference of the sprocket, without catching or jumping. Any irregularities in operation at this stage usually indicate an alignment error rather than a defect in the sprocket itself.

Where is this product used?

08B-3 sprockets operate in drives of construction machinery, goods lifts, aggregate conveyors and woodworking machines - wherever tooth durability under load matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.