Sprocket 08B-2 (1/2") z=44 with hub, steel

Product Description

Sprocket 08B-2 (1/2") z=44 with hub, steel is designed for 08B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 12.7 mm (1/2"). It has 44 teeth and is made of steel.

The sprocket has a hub with a pilot bore, which is bored to the shaft size and completed with a keyway or a set screw hole.

Technical data

Applications

It suits go-karts, recreational vehicles and small garden machinery. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does the 08B-2 z=44 sprocket fit?

08B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 12.7 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 40 chain?

No. ASA 40 chain (American standard) has the same pitch, but a different roller diameter (7.94 mm instead of 8.51 mm) and a different inner width (7.94 mm instead of 7.75 mm). The 08B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How does tooth wear affect machine operation?

Worn teeth make the chain engage the sprocket unevenly and abruptly. This causes vibrations that are passed on to shafts and bearings and accelerate wear of the whole drive.

When are multi-strand sprockets used?

Double- and triple-strand sprockets work with multi-strand chains in heavily loaded drives where there is no room for a chain with a larger pitch. Several strands share the load evenly, which reduces wear and the risk of chain breakage.

How do I check the pitch of a sprocket?

The sprocket pitch matches the chain pitch - it is the distance between the centres of adjacent teeth measured on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket: it should sit on the teeth without tension. This sprocket has a pitch of 12.7 mm (1/2").

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.