Sprocket 08B-2 z=15 for Taper-Lock bush 1008

Product Description

Sprocket 08B-2 z=15 for Taper-Lock bush 1008 works with 08B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 12.7 mm (1/2"). It has 15 teeth and is made of C45 steel.

The sprocket has a seat for a Taper-Lock 1008 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 1008 bush with a bore that matches the shaft. The hub diameter is 46 mm and the total width of the sprocket is 22 mm. The bush is not included - the 1008 bush can be purchased separately from our range.

Technical data

Applications

It is used in industrial automation drives, feeders and food industry machinery. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does this sprocket fit?

08B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 12.7 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 40 chain?

No. ASA 40 chain (American standard) has the same pitch, but a different roller diameter (7.94 mm instead of 8.51 mm) and a different inner width (7.94 mm instead of 7.75 mm). The 08B sprocket is designed for European-standard chain, so the two systems should not be mixed.

When is a sprocket for a Taper-Lock bush the right choice?

Wherever quick mounting and replacement matter. The clamping bush eliminates boring the hole and cutting a keyway in the sprocket - simply choose a bush with a bore that matches the shaft, seat it in the sprocket and tighten the screws.

How do I choose the bush for this sprocket?

The sprocket has a seat for a Taper-Lock 1008 bush, so a bush with the same number is needed. It is chosen with a bore matching the shaft diameter - before ordering, it is worth measuring the shaft carefully with a caliper in several places.

What does bush number 1008 mean?

The four-digit number indicates the size of the bush. The last two digits give its width in tenths of an inch - the 1008 bush is 0.8 inch wide. The sprocket and the bush must have the same number.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.