Sprocket 08B-1 z=95 with hub, Cast iron

Product Description

Sprocket 08B-1 z=95, with cast iron hub

The sprocket 08B-1 shown is a simplex sprocket with 95 teeth, made with a hub, for chain with a pitch of 1/2" / 12.7 mm. The sprocket is made of grey cast iron - a traditional material for sprockets in applications with moderate loads and lower rotational speeds; the bore in the hub is a pilot bore intended to be machined to the shaft size.

Technical data

Frequently asked questions

How does rotational speed affect the selection of the minimum number of teeth of a sprocket in the system?

At higher rotational speeds, a larger minimum number of teeth on the smallest sprocket in the system is recommended to reduce chain vibration and impacts resulting from the so-called polygon effect. With very small sprockets (e.g. 9-11 teeth) and high speeds, wear and vibration levels increase significantly faster than with larger sprockets.

How should large-diameter sprockets be transported and stored to prevent deformation?

Large sprockets are best stored and transported lying flat on a level, stable surface, rather than resting on the toothed rim alone, which is more susceptible to local deformation. When lifting, it is advisable to use slings passed through the hub bore rather than hooking them onto individual teeth.

Does the difference in hardness between sprocket and chain affect their rate of wear?

Yes - chain and sprocket manufacturers select hardness so that they wear as evenly as possible, rather than one element "cutting down" the other. An excessively hard sprocket working with a soft, non-certified chain (or vice versa) leads to faster wear of the weaker element.

How can you check that the sprocket meshes correctly with the chain when the machine is started for the first time?

At low speed (e.g. turning the shaft by hand), it is worth observing whether the chain enters and leaves the teeth smoothly around the entire circumference of the sprocket, without catching or jumping. Any irregularities in operation at this stage usually indicate an alignment error rather than a defect in the sprocket itself.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

08B-1 sprockets operate in drives of construction machinery, goods lifts, aggregate conveyors and woodworking machines - wherever tooth durability under load matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.