Sprocket 06B-3 z=95 with hub, Cast iron

Product Description

Sprocket 06B-3 z=95, with cast iron hub

Sprocket 06B-3 with hub, 95 teeth, triplex (three-strand) - a product matched to chain with a pitch of 9.53 mm (3/8"). The sprocket is made of grey cast iron - a traditional material for sprockets in applications with moderate loads and lower rotational speeds; the bore in the hub is a pilot bore intended to be machined to the shaft size.

Technical data

Frequently asked questions

When is it worth considering a sprocket made of reinforced steel for heavy-duty operating conditions?

In heavy dust, with powerful jerks (e.g. in presses) and wherever a breakdown in the middle of the season is not an option, sprockets made of higher-strength quenching and tempering steel or a variant with hardened teeth are often a good solution - it is worth consulting the supplier in the case of unusual operating conditions.

What does the marking "z=X" on a sprocket mean and why is it so important when ordering?

"z" is the number of teeth of the sprocket - together with the pitch and the number of chain strands, it unambiguously defines the sprocket geometry (pitch circle and outside diameter). Ordering a sprocket with the wrong "z" usually means that it will not work correctly with the second sprocket already in the machine, and a different transmission ratio than intended will result.

Does a larger number of teeth always mean a longer service life for the sprocket?

Largely yes - the more teeth are engaged, the lower the load on each individual tooth, and the chain runs over a larger wrap angle, which reduces dynamic impacts. Very small sprockets (with fewer than fifteen or so teeth) wear the fastest and are best avoided if the drive design allows.

Is it worth using guards on sprockets and the entire drive?

Yes - a guard protects operators from contact with moving parts and at the same time limits the ingress of dust and moisture to the chain, which genuinely extends its service life. In many industrial machines, a chain drive guard is also an occupational safety requirement.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

Applications include drives in the food industry, packaging machines, sorting lines and agricultural harvesting machines, where the sprocket operates seasonally but under full load.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.