Sprocket 06B-2 z=57 for Taper-Lock bush 1610

Product Description

Sprocket 06B-2 z=57 for Taper-Lock bush 1610 is designed for 06B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 9.525 mm (3/8"). It has 57 teeth and is made of C45 steel.

The sprocket has a seat for a Taper-Lock 1610 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 1610 bush with a bore that matches the shaft. The hub diameter is 80 mm and the total width of the sprocket is 25 mm. The bush is not included - the 1610 bush can be purchased separately from our range.

Technical data

Applications

It works well in drives of conveyors, packaging machines and production lines where the sprocket has to be replaced quickly. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does this sprocket fit?

06B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 9.525 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 35 chain?

No. ASA 35 chain (American standard) has the same pitch, but a different roller diameter (5.08 mm instead of 6.35 mm) and a different inner width (4.77 mm instead of 5.72 mm). The 06B sprocket is designed for European-standard chain, so the two systems should not be mixed.

Is this sprocket available in another version?

Yes. Also available: Sprocket 06B-2 z=57 for Taper-Lock bush 1610, cast iron.

When are multi-strand sprockets used?

Double- and triple-strand sprockets work with multi-strand chains in heavily loaded drives where there is no room for a chain with a larger pitch. Several strands share the load evenly, which reduces wear and the risk of chain breakage.

When is a sprocket for a Taper-Lock bush the right choice?

Wherever quick mounting and replacement matter. The clamping bush eliminates boring the hole and cutting a keyway in the sprocket - simply choose a bush with a bore that matches the shaft, seat it in the sprocket and tighten the screws.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.