Sprocket 06B-2 z=38 for Taper-Lock bush 1610

Product Description

Sprocket 06B-2 z=38 for Taper-Lock bush 1610 fits 06B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 9.525 mm (3/8"). It has 38 teeth and is made of C45 steel.

The sprocket has a seat for a Taper-Lock 1610 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 1610 bush with a bore that matches the shaft. The hub diameter is 80 mm and the total width of the sprocket is 25 mm. The bush is not included - the 1610 bush can be purchased separately from our range.

Technical data

Applications

It is found in agricultural machinery, workshop equipment and gate drives. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does this sprocket fit?

06B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 9.525 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 35 chain?

No. ASA 35 chain (American standard) has the same pitch, but a different roller diameter (5.08 mm instead of 6.35 mm) and a different inner width (4.77 mm instead of 5.72 mm). The 06B sprocket is designed for European-standard chain, so the two systems should not be mixed.

What does bush number 1610 mean?

The four-digit number indicates the size of the bush. The last two digits give its width in tenths of an inch - the 1610 bush is 1.0 inch wide. The sprocket and the bush must have the same number.

How do I mount a sprocket with a Taper-Lock bush?

Insert the bush into the sprocket seat, align the holes and lightly screw in the screws. Then slide the assembly onto the shaft and tighten the screws alternately until the bush is firmly clamped on the shaft.

Can the bush taper be greased before mounting?

No. The bush works by friction, and grease on the tapered surfaces can cause the bush to be drawn in too deep and crack the sprocket hub. The tapered surfaces must be degreased before mounting.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.